Tag: Lacquer Dial

September 28 2026

Louis Vuitton Monterey Ceramic: The Iconic Pebble-Shaped Watch Returns In Green And Black

MRSTATELESS LOUIS VUITTON, NEW RELEASES 2026, Ceramic, Lacquer Dial 0

Louis Vuitton is expanding the modern interpretation of one of its most distinctive vintage watches with the new Monterey Ceramic, bringing the design of the original 1988 model into the permanent collection.

Created by Italian architect and designer Gae Aulenti, the Monterey was notable for its unusual pebble-shaped case and unconventional construction. For the new generation, Louis Vuitton retains the essential character of the original while replacing its quartz architecture with an automatic mechanical movement and simplifying the dial.

Unlike the limited-edition Monterey introduced in 2025, the new Ceramic models are not restricted in production. They are offered in two versions, combining either black or green ceramic with a 37 mm case.

A 1980s Design Reinterpreted

The Monterey’s rounded silhouette remains its defining characteristic. The polished ceramic case measures 37 mm in diameter, preserving the relatively compact proportions of the original LV II, while its 11 mm thickness accommodates the modern automatic movement.

There are no conventional lugs. Instead, the unusual case construction incorporates a suspended caseback that allows the leather strap to pass directly through the watch, maintaining one of the most recognizable features of the original design.

At 12 o’clock, a steel crown provides a contrasting detail and is finished with a Clous de Paris pattern.

Two Ceramic Cases, Two Dial Personalities

The Monterey Ceramic is available in black and green ceramic, with each case paired with a different dial execution.

The black version uses a white dial with black and red markings, creating a high-contrast appearance. Red brass hour and minute hands are joined by a blue seconds hand, adding several small touches of colour to the otherwise monochrome composition.

The green model takes a more contemporary approach, using a matching green dial with white markings and striking yellow syringe-shaped hands. The combination creates a strong tone-on-tone effect while retaining the playful character associated with the Monterey.

Both dials are finished with lacquer and a final matte varnish, giving the surfaces a subtle texture. They differ from the grand feu enamel dial used for the 2025 Monterey, but their production still involves multiple firing stages. The markings are applied using acrylic stamping and fired after each layer, with the white version requiring an additional firing stage because of its two-colour decoration.

Automatic Mechanics

Inside the ceramic case is the LFTMA01.02 automatic calibre, replacing the quartz mechanism used by the original Monterey.

The move to mechanical watchmaking also explains the slightly greater thickness of the new models. Rather than attempting to reproduce every technical feature of the vintage watch, Louis Vuitton has concentrated on preserving its visual identity while giving the Monterey a contemporary mechanical foundation.

This approach also places the watch naturally within the broader watchmaking activities of La Fabrique du Temps Louis Vuitton, where the brand has increasingly developed its own mechanical and decorative expertise.

A Distinctive Caseback

The rear of the Monterey Ceramic is perhaps as unusual as its front.

The case retains the characteristic suspended construction of the original, with the strap passing underneath the case rather than attaching through conventional lugs. This creates a very clean silhouette and allows the rounded case to remain visually uninterrupted.

The construction is an important part of what makes the Monterey different from a conventional 37 mm watch: its identity comes as much from the relationship between case and strap as from the dial itself.

From Limited Edition to Permanent Collection

The new Monterey Ceramic follows the 2025 Monterey revival, but represents a different strategy for the model. Rather than another small numbered release, the Ceramic references become part of the Louis Vuitton permanent collection.

The decision also brings the design closer to the proportions of the original LV II, while the ceramic construction, automatic movement and simplified dials give it a distinctly modern interpretation.

The Louis Vuitton Monterey Ceramic is priced at € 23,000 and is available through Louis Vuitton boutiques.

Read more here.

General Specifications:

Brand: Louis Vuitton

Model: Monterey

Dial: White lacquered, green lacquered

Case Material: Black ceramic, green ceramic

Case Dimensions: 37 mm Diameter, 11 mm thickness

Crystal: Sapphire glass

Case Back: Stainless steel

Water Resistance: 30 Meters

Strap: Black or green calfskin strap with steel pin buckle

Calibre: LFT MA01.02

Dimensions: 23 mm Diameter, 5.40 mm thickness

Functions: Hours, minutes, seconds

Winding: Automatic

Frequency: 4 Hz (28,800 Vph)

Jewels: 26

Power Reserve: 45 Hours

Price: € 23,000

Limited Edition: No

Availability: Now

GlashutteOriginal_SenatorChronograph_1100x667_1

August 20 2026

Two Faces Of The Chronograph: Glashütte Original Senator 2026

MRSTATELESS GLASHÜTTE ORIGINAL, NEW RELEASES 2026, Chronograph, Lacquer Dial 0

Glashütte Original is giving its Senator Chronograph collection a significant update for 2026, introducing two new models that share the same technical foundation but take very different approaches to design. The new Senator Chronograph adopts a refined, traditional aesthetic, while the Senator Chronograph Navigator introduces a more utilitarian character inspired by historic pilot’s watches.

Both models also represent a substantial technical revision of the previous generation. The cases are smaller and thinner, the dials have been simplified, and a new movement, the Calibre 37-24, brings the brand’s integrated automatic flyback chronograph into a more compact format.

A More Compact Chronograph Case

Both watches are housed in a 41 mm stainless-steel case measuring 12.90 mm thick. That represents a noticeable reduction from the previous size.

The reduction is particularly relevant for a chronograph, where the movement and additional components traditionally result in a substantial case profile. The shorter, curved lugs also contribute to a more compact appearance on the wrist.

The case combines polished and satin-brushed surfaces and is topped by a sapphire crystal with anti-reflective coating on both sides. At the back, another sapphire crystal provides a view of the movement.

Glashütte Original has also changed the chronograph controls. The new models use traditional mushroom-shaped pushers at 2 and 4 o’clock instead of the more angular pushers found on their predecessors. Water resistance is rated at 50 metres.

Despite sharing the same case architecture, the two watches immediately establish different identities through their dials and crowns.

Senator Chronograph: A Traditional Interpretation

The standard Senator Chronograph is the more formal of the two.

Its silver-white galvanic dial features a fine grainé texture, creating a subtle background for the applied solid-gold Roman numerals. The numerals are blue-coated, while the blued-steel spade-style hands reinforce the classical Glashütte aesthetic.

The chronograph arrangement is deliberately symmetrical. The small seconds occupy the 9 o’clock position, while the 30-minute chronograph counter sits opposite at 3 o’clock. Both recessed sub-dials receive a textured surface inspired by the grooves of a vinyl record.

One of the most significant changes is the simplified display architecture. The previous 12-hour counter at 12 o’clock has been removed, as has the power-reserve indication that was previously incorporated into the small-seconds register.

The Glashütte Original signature now sits below 12 o’clock, allowing a conventional hour marker to occupy the top of the dial.

At 6 o’clock is the brand’s characteristic Panorama Date, framed in white gold. A tachymeter scale is printed around the flange, completing the chronograph-focused layout without overcrowding the central dial.

Senator Chronograph Navigator: Built Around Legibility

The Senator Chronograph Navigator uses the same technical platform but changes the visual language considerably.

Its matte black lacquered dial is dominated by large Arabic numerals made from solid luminous material. Luminous sword-style hands further emphasise the focus on legibility, while the central chronograph seconds hand and the hands of the 30-minute counter and small seconds are finished in white lacquer.

The recessed sub-dials retain the same vinyl-record-inspired texture as the classical version, while the tachymeter scale is engraved into the flange.

The Panorama Date again occupies 6 o’clock, creating visual symmetry with the two subsidiary registers at 3 and 9 o’clock.

The result is a watch that moves away from the formal Senator aesthetic and towards the functional appearance traditionally associated with aviation instruments. The distinctive crown reinforces that difference.

Calibre 37-24: The Technical Core

Both watches are powered by the new Calibre 37-24, an evolution of Glashütte Original’s Calibre 37 family first introduced in 2014.

The movement is an integrated automatic chronograph equipped with a column wheel and flyback functionality. Measuring 34.20 mm in diameter and just 8 mm thick, its dimensions have been adapted to suit the slimmer 2026 Senator Chronograph cases.

The Calibre 37-24 operates at 28,800 vibrations per hour and offers a 70-hour power reserve. It contains 47 jewels and uses a silicon balance spring, designed to improve resistance to magnetic influences and temperature variations.

Regulation is performed using solid-gold screws positioned on the balance rim, complemented by Glashütte Original’s characteristic swan-neck fine adjustment system.

Saxon Finishing on Display

As expected from Glashütte Original, the movement is also an important part of the watches’ appeal.

Visible through the sapphire caseback, the Calibre 37-24 features a three-quarter plate decorated with Glashütte stripes. The finishing extends to bevelled edges, polished steel components and blued screws, producing the combination of textures and colours associated with the manufacture’s movements.

The newly developed skeletonised rotor incorporates a 21-carat gold oscillating weight and the brand’s mirrored “G” logo.

This means the mechanical architecture is not simply functional; it is also intended to provide a detailed view of traditional Saxon movement finishing whenever the watch is off the wrist.

Three Strap and Bracelet Options

Glashütte Original offers both versions with a choice of Louisiana alligator leather, a sand-coloured synthetic strap or a stainless-steel bracelet.

All options use a quick-change system, allowing the strap or bracelet to be replaced without tools. The folding clasp has also been redesigned with a quick-change mechanism, meaning it can be transferred between compatible straps without requiring a separate clasp.

This gives the two watches a degree of versatility that complements their contrasting personalities. The classical Senator Chronograph naturally lends itself to leather, while the Navigator’s more functional character works particularly well with the bracelet or synthetic strap.

Availability and Prices

The two watches are part of the permanent Glashütte Original collection and are available through the brand’s boutiques and authorised retailers.

Prices start at € 15,900 on a leather or synthetic strap and rise to € 16,800 for the stainless-steel bracelet versions.

Read more here.

General Specifications:

Brand: Glashütte Original

Model: Senator Chronograph

Reference: 1-37-24-01-02-61 (Senattor Chronograph on leather strap), 1-37-24-01-02-64 (Senattor Chronograph on synthetic strap), 1-37-24-01-02-71 (Senattor Chronograph on steel bracelet), 1-37-24-20-12-61 (Senattor Chronograph Navigator on leather strap), 1-37-24-20-12-64 (Senattor Chronograph Navigator on synthetic strap), 1-37-24-20-12-71 (Senattor Chronograph Navigator on steel bracelet)

Dial: Graines galvanic silver (Seantor Chrongraph), matt deep-black lacquer (Seantor Chrongraph Navigator)

Case Material: Stainless steel

Case Dimensions: 41 mm Diameter, 12.90 mm thickness

Crystal: Sapphire glass

Case Back: Sapphire glass

Water Resistance: 50 Meters

Strap: Blue or black Louisiana alligator leather strap, sand-coloured synthetic strap, stainless-steel bracelet

Calibre: 37-24

Functions: Hours, minutes, small seconds, flyback chronograph, panorama date

Winding: Automatic

Jewels: 47

Frequency: 4 Hz (28,800 Vph)

Power Reserve: 70 Hours

Price: € 15,900 (on leather or synthetic strap), € 16,800 (on steel bracelet)

Availability: Now

Limited Edition: No

August 19 2026

A Smaller Flieger Takes Flight: Meet the New Tutima T5

Ricardo Amaral TUTIMA 2026, Lacquer Dial, Pilot Watch, Titanium 0

Pilot’s watches are traditionally associated with large cases, high-contrast dials and uncompromising functionality. The new Tutima Flieger T5 Titanium takes those familiar ingredients and puts greater emphasis on something that is becoming increasingly important in contemporary watchmaking: wearability.

At 38 mm, the Flieger T5 is considerably more compact than the 41 mm models in the collection, while its Grade 5 titanium construction further changes how the watch feels on the wrist. The result is a Flieger that retains its instrument-watch identity but is easier to imagine as an everyday mechanical watch.

The Importance of 38.5mm

The headline specification is arguably not the movement or even the titanium case, but the diameter.

At 38.50 mm, the Flieger T5 occupies a versatile middle ground. It is large enough to preserve the visual presence expected from a pilot’s watch, yet small enough to avoid the oversized proportions associated with some traditional aviation designs.

Its 12.50 mm thickness also gives the watch a substantial mechanical presence without making it excessively bulky. Short lugs contribute to the compact footprint, helping the case sit closer to the wrist.

This change in proportions is particularly relevant because the Flieger’s design does not depend on a large case to remain legible. The dial does most of that work.

Titanium Changes the Character

Tutima uses Grade 5 titanium for the case and bracelet, bringing the familiar advantages of the material: low weight, high strength and strong resistance to corrosion.

For a watch intended to be worn regularly, the reduction in weight can be just as important as the technical properties of the material. Combined with the smaller case, it gives the Flieger T5 a considerably more discreet physical presence than its dimensions alone might suggest.

The predominantly satin-brushed case reinforces the functional character, while polished surfaces on the bezel, crown and bracelet’s centre links prevent the watch from becoming visually austere.

The large, fluted screw-down crown is another reminder of the Flieger’s practical origins. It is designed to be easily manipulated while contributing to the distinctive profile of the case.

Water resistance reaches 100 metres, and the watch uses a domed sapphire crystal with anti-reflective treatment.

Everything on the Dial Has a Purpose

The dial is where Tutima’s aviation background becomes most obvious.

Available in black or blue lacquer, it combines a relatively clean layout with strong visual hierarchy. The orientation triangle and two dots at 12 o’clock immediately establish the pilot-watch identity, while baton markers and Arabic numerals provide straightforward time reading.

The sword-shaped hour and minute hands are heavily coated with Super-LumiNova, as are the principal hour markers. This makes low-light visibility one of the watch’s defining functional characteristics rather than simply a decorative feature.

A red central seconds hand adds the strongest splash of colour, while the date display at 6 o’clock is positioned symmetrically within the dial. The date disc is colour-matched to the dial, helping it integrate into the design.

Interestingly, Tutima has avoided adding additional complications or decorative elements. There is no GMT hand, power-reserve indicator or chronograph functionality competing for attention. The result is a watch that remains focused on its primary task: displaying the time clearly.

A Proven Mechanical Foundation

The Flieger T5 is powered by Tutima calibre 330, an automatic movement based on the ETA 2836.

It operates at 28,800 vibrations per hour and offers around 41 hours of power reserve. Through the sapphire caseback, the movement can be seen along with its rhodium-plated finish and rotor carrying Tutima’s gold “T” emblem.

This is not a movement chosen to make the Flieger T5 a showcase of haute horlogerie. Instead, the calibre’s appeal lies in its established architecture and practical serviceability.

For a watch whose emphasis is on daily use, that approach makes sense. The mechanical engine is there to provide reliable automatic timekeeping without distracting from the watch’s broader purpose.

Two Personalities

Tutima offers an interesting choice in how the Flieger T5 is worn.

The three-row titanium bracelet reinforces the contemporary side of the watch. It maintains the lightweight construction while introducing polished centre links that give the otherwise utilitarian case a more sophisticated appearance.

The alternative brown Horween leather strap moves in the opposite direction. Its vintage character works naturally with the pilot-watch concept and makes the watch feel more closely connected to traditional aviation instruments.

This means the same 38.50 mm case can occupy two rather different positions: a modern, lightweight sports watch on titanium or a more traditional pilot’s watch on leather.

A Flieger Without the Excess

The most interesting aspect of the Flieger T5 may ultimately be what Tutima has chosen not to change.

The watch still has the essential ingredients of the Flieger formula: exceptional legibility, luminous hands and markers, a prominent 12 o’clock orientation marker, a robust crown and a straightforward automatic movement.

What has changed is the scale and material.

By reducing the diameter to 38.50 mm and using titanium throughout the case and bracelet, Tutima has made the Flieger easier to wear beyond its original aviation context. The polished details and lacquered dials also give it enough refinement to work as an everyday watch rather than simply an instrument-inspired piece.

That makes the Flieger T5 an interesting evolution of Tutima’s formula: not a radical reinterpretation, but a more compact and versatile expression of what a modern Flieger can be.

The Tutima Flieger T5 Titanium is priced at € 2,350 on the titanium bracelet and € 1,950 with the brown Horween leather strap.

Read more here.

General Specifications:

Brand: Tutima

Model: Flieger T5 Titanium

Reference: 6109-02 (black on bracelet), 6109-04 (blue on bracelet), 6109-03 (blue on strap)

Dial: Lacquered black, lacquered blue

Lume: Super-LumiNova

Case Material: Grade 5 Titanium

Case Dimensions: 38.50 mm Diameter, 12,50 mm thickness

Crystal: Sapphire glass

Case Back: Sapphire glass

Water Resistance: 100 Meters

Strap: Light brown Horween leather strap, titanium bracelet

Calibre: 330

Functions: Hours, minutes, seconds, date

Winding: Automatic

Frequency: 4 Hz (28,800 Vph)

Jewels: 25

Power Reserve: 41 Hours

Price: € 1,950 (on strap), € 2,350 (on bracelet)

Limited Edition: No

Availability: Now

August 18 2026

Kiwame Tokyo Yane: A Refined Rectangular Watch From Asakusa

Ricardo Amaral KIWAME TOKYO, NEW RELEASES 2026, Dress Watch, Lacquer Dial, Limited Edition 0

Japanese microbrand Kiwame Tokyo continues to draw inspiration from the architecture and cultural heritage of its home city. Based in Asakusa, Tokyo, the independent brand has built its identity around compact watches that combine traditional Japanese references with clean, contemporary design. Its latest creation, the Yane, takes that philosophy in a distinctly different direction with a rectangular case influenced by both Art Deco geometry and traditional Japanese temple roofs.

The name Yane means “roof” in Japanese, an appropriate choice for a watch whose case incorporates several architectural details inspired by the rooftops of historic temples in Asakusa.

A Rectangular Case with Architectural Character

Measuring 44 mm from top to bottom, 26.50 mm wide and 9.70 mm thick, the stainless steel case gives the Yane a noticeably different presence from Kiwame Tokyo’s previous round watches.

Its proportions are elongated and compact, creating a silhouette reminiscent of early 20th-century dress watches while avoiding a direct recreation of any particular historical model. The Art Deco influence is particularly apparent in the strong geometric lines and symmetrical profile.

The most distinctive detail can be found when looking at the case from the side. Its polished surfaces curve in a way that recalls the sweeping silhouette of a traditional Japanese temple roof. At both ends, concave sections feature engraved horizontal lines, visually referencing the layered rows of roof tiles found on historic Japanese architecture.

The architectural theme continues on the reverse. The caseback incorporates a pattern inspired by taruki, the exposed wooden rafters positioned beneath traditional temple eaves.

Minimalism on the Dial

Kiwame Tokyo offers the Yane with either a burgundy or black lacquered dial, both following an intentionally restrained design.

There are no conventional hour markers around the dial. Instead, the only applied index appears at 12 o’clock and takes the form of a mune, the raised ridge running along the top of a traditional Japanese roof.

This single architectural reference replaces an entire set of hour indices, giving the dial an unusually clean appearance. The result is a watch that relies heavily on its case proportions, surface finishing and dial texture rather than conventional complications or decorative elements.

Both versions feature only hours and minutes, reinforcing the Yane’s straightforward dress-watch character.

A Compact High-Beat Automatic

Inside the Yane is the Miyota 6T27, a compact automatic movement developed for smaller watches.

The calibre measures 19.80 mm by 5.23 mm, uses 21 jewels and operates at a relatively high frequency of 4Hz (28,800 vibrations per hour). It provides a 40-hour power reserve and drives a simple three-hand display.

The choice of a compact movement is particularly relevant given the Yane’s narrow rectangular case. Rather than using a larger calibre and adapting the case around it, the 6T27 allows Kiwame Tokyo to maintain the watch’s slim, elongated proportions.

Leather Straps Complete the Design

The burgundy lacquered version comes with a burgundy Italian calfskin strap, measuring 20 mm at the lugs and tapering to 16 mm at the buckle. The black-dial model receives a matching black leather strap.

Both use quick-release spring bars, making strap changes straightforward and allowing owners to alter the character of the watch without tools.

Limited First Production

Kiwame Tokyo will initially produce the Yane in a limited batch of 400 watches, split evenly between the two dial colours.

Pre-orders open on 19 August 2026 at 11:00 JST, with the first deliveries expected toward the end of December. Regular sales are scheduled to resume in January 2027.

The Yane is priced at USD 730 before tax.

I’d add it as a short closing section, keeping the opinion clearly separate from the more technical description:

Our Take

The Yane is, above all, a beautiful dress watch. Its simple two-hand configuration is exactly what we would expect from a piece of this character, while the minimalist dial leaves plenty of room for the unusual 12 o’clock marker, the Kiwame Tokyo inscriptions and a discreet “Japan Made” at the bottom.

Its distinctive rectangular silhouette is undoubtedly one of its strongest features, although we feel the case could benefit from being slightly shorter. Reducing its length would, in our eyes, improve its proportions and make the watch more versatile for a wider range of wrists.

The other important point is its price. At USD 730 before tax, the Yane places a genuinely elegant and characterful dress watch on the market at a very competitive level, particularly considering its architectural details, lacquered dials and automatic movement.

As for the colours, our favourite is undoubtedly the burgundy version, which gives the watch a warmer and more distinctive personality. That said, the black dial remains the classic choice and one that is unlikely ever to look out of place.

Read more here.

General Specifications:

Brand: Kiwame Tokyo

Model: Yane

Dial: Black lacquer, burgundy lacquer

Case Material: Stainless steel

Case Dimensions: 26.50 mm Width, 9.70 mm thickness, 44 mm lenght

Crystal: Sapphire glass

Case Back: Stainless steel

Water Resistance: 30 Meters

Strap: Black or burgundy Italian calfskin leather strap with a steel pin buckle

Calibre: Miyota 6T27

Dimensions: 19.80 mm Width, 5.23 mm thickness

Functions: Hours, minutes

Winding: Automatic

Frequency: 4 Hz (28,800 Vph)

Jewels: 21

Power Reserve: 40 Hours

Price: USD 730 (excl. VAT)

Limited Edition: Yes, 400 pieces (first batch)

Availability: August 19, 2026 at 11:00 AM JST for pre-orders.

Seiko_PresageCraftsmanshipEnamel&UrushiLacquer_1100x667_1

August 13 2026

Seiko Revisits Its First Wristwatch With The Presage Classic HCC005 & HCC006

Ricardo Amaral NEW RELEASES, SEIKO 2026, Dress Watch, Enamel, Lacquer Dial 0

The 1913 Laurel holds a special place in Seiko’s history as Japan’s first wristwatch, and its distinctive design now provides the foundation for two new additions to the Presage Classic “Craftsmanship” collection. The HCC005 and HCC006 combine the Laurel’s classical dial architecture with two traditional Japanese decorative techniques: hand-crafted enamel and urushi lacquer.

Rather than reproducing the original watch, Seiko has adapted its defining visual elements for a contemporary mechanical watch. The result is two references with the same dimensions and movement, but distinctly different dial treatments that highlight the character of each artisanal technique.

Laurel-Inspired Design

Both watches feature a 39.60 mm stainless-steel case measuring 12.4mm thick, with 30 metres of water resistance. A dual-curved sapphire crystal protects the dial, with anti-reflective coating applied to improve legibility. The rear of each watch is fitted with a screw-down exhibition caseback, allowing a view of the mechanical movement.

The HCC005 uses stainless steel with a super-hard coating, while the HCC006 receives a yellow gold-coloured finish, giving the two references noticeably different personalities despite their shared proportions.

Their dial layouts are closely tied to the Laurel. Arabic numerals provide the principal hour markers, while a small 24-hour subdial at 6 o’clock adds another historical reference. The HCC005 also reproduces the Laurel’s distinctive red “12”, complemented by blue hands.

HCC005: Traditional Enamel Dial

The HCC005 places its emphasis on a glossy white enamel dial. Creating the surface begins with finely ground enamel applied to a copper base, followed by repeated firing at temperatures approaching 800°C.

This process produces the characteristic depth and smoothness associated with enamel, while also giving the dial excellent resistance to fading over time.

The production is supervised by master enamel artisan Mitsuru Yokosawa, with Kazunori Uchiyama contributing to the work after apprenticing under Yokosawa. Their involvement reflects Seiko’s focus on preserving specialist craftsmanship and passing these techniques to the next generation.

The resulting combination of white enamel, blue hands and the red numeral at 12 creates a particularly faithful interpretation of the Laurel’s visual identity.

HCC006: Japanese Urushi Lacquer

The HCC006 takes the same historical inspiration in a darker direction. Its dial is produced using urushi lacquer, a traditional Japanese technique known for its deep colour, glossy appearance and layered surface.

Rather than relying on a single application, urushi is built up through successive layers of lacquer and polishing. The process creates the rich black appearance of the HCC006 while giving the dial a distinctive visual depth.

The work is carried out under the supervision of lacquer master Isshu Tamura, together with Toshikazu Tsuji, Mitsuki Tsuji and their workshop.

Against the black lacquer surface, the watch uses gold-coloured numerals, indices and hands, creating a strong contrast while maintaining the classical character established by the Laurel-inspired design.

Seiko Calibre 6R5H

Powering both models is Seiko’s manufacture Calibre 6R5H, an automatic movement operating at 21,600 vibrations per hour.

Its most notable practical specification is a 72-hour power reserve, allowing the watch to continue running for three days when fully wound. The movement can be viewed through the sapphire exhibition caseback.

The combination of a traditional operating frequency and extended power reserve provides a modern mechanical foundation for these craftsmanship-focused Presage models.

Leather Straps

Both references are fitted with supple oil-tanned leather straps sourced from tanneries certified by the Leather Working Group.

A three-fold deployant clasp provides the closure, giving the watches a contemporary wearing experience while maintaining the formal character of their classical designs.

Two Interpretations of Japanese Craftsmanship

The HCC005 and HCC006 offer two distinct approaches to the same historical inspiration. The white enamel HCC005 is the closer visual interpretation of the 1913 Laurel, particularly through its white dial, blue hands and red numeral at 12. The HCC006 takes the same foundation and transforms it through black urushi lacquer and gold-coloured detailing.

Both models will join the permanent Presage Classic collection and will be available through Seiko Boutiques and selected retailers worldwide from September 2026.

The HCC005 will be priced at € 1,430, while the HCC006 will retail for € 1,640.

Read more here.

General Specifications:

Brand: Seiko

Model: Presage Classic Series “Craftsmanship” Enamel and Urushi Lacquer

Reference: HCC005 (enamel), HCC006 (urushi lacquer)

Dial: White enamel (HCC005), black urushi lacquer (HCC006)

Case Material: Stainless steel with super-hard coating (HCC005), stainless steel with yellow gold-coloured plating (HCC006)

Case Dimensions: 39.60 mm Diameter, 12.40 mm thickness

Crystal: Sapphire glass

Case Back: Sapphire glass

Water Resistance: 30 Meters

Strap: Oil-tanned leather strap from LWG-certified tanneries with three-fold clasp and push-button release

Caliber: 6R5H

Functions: Hours, minutes, seconds, 24h display

Winding: Automatic

Frequency: 3 Hz (21,600 Vph)

Jewels: 24

Power Reserve: 72 Hours

Price: € 1,430 (HCC005), € 1,640 (HCC006)

Availability: September 2026

Limited Edition: No

August 7 2026

Yema Refreshes Superman Bronze CMM.10 With Three New Lacquered Dials

MRSTATELESS NEW RELEASES, YEMA 2026, Bronze, Diver, Lacquer Dial 0

French watchmaker Yema continues to expand its growing Superman collection with the introduction of three new Bronze CMM.10 references. The latest additions preserve the model’s vintage-inspired character while introducing fresh lacquered dials in brown, green and white, paired with matching FKM rubber straps and powered by the brand’s in-house automatic movement.

Bronze Case With Compact Vintage Proportions

The new Superman Bronze CMM.10 retains the same well-balanced dimensions that have made the collection popular among dive watch enthusiasts. Its bronze case measures 39 mm in diameter, 10.95 mm thick, and offers a comfortable profile suitable for everyday wear while maintaining professional dive watch credentials thanks to its 300-meter water resistance.

The case combines vertically brushed surfaces with polished bevels, enhancing its retro-inspired appearance while adding visual depth. Like any bronze watch, the alloy will gradually develop a unique patina over time, giving each piece an individual character shaped by its owner’s use and environment.

The bronze unidirectional diving bezel features a circular brushed finish that contrasts with the case, carrying a 60-minute diving scale and the signature luminous triangle at 12 o’clock. Protecting the dial is a 2.20 mm double-domed sapphire crystal, while the screw-down crown with the embossed Yema logo works alongside the brand’s distinctive bezel-lock mechanism—a hallmark of the Superman collection. Turning the watch over reveals a sapphire exhibition case back showcasing the movement inside.

Three New Lacquered Dials

The main novelty arrives through three glossy lacquered dial options available in brown, green and white. Each version is finished with gilt accents that reinforce the watch’s vintage personality while offering a richer and more refined appearance than previous editions.

Applied Yema logos, redesigned applied hour markers and diamond-cut hands all receive a gilt finish and are filled with Grade A Super-LumiNova. During daylight, the lume displays a warm beige tone before glowing bright green in low-light conditions. The revised applied indexes also give the dial a slightly more modern look without compromising the Superman’s classic identity.

In-House CMM.10 Manufacture Movement

Powering the watch is Yema’s manufacture Calibre CMM.10, designed, assembled and regulated at the brand’s facilities in Morteau, France.

The automatic movement beats at 28,800 vibrations per hour (4 Hz) and delivers an impressive 70-hour power reserve thanks to its large mainspring barrel. According to Yema, the calibre is regulated to an accuracy of -3/+5 seconds per day and has also been engineered to offer improved resistance against shocks and magnetic fields. Its symmetrical mainplate architecture serves as the foundation for the brand’s latest generation of in-house movements.

Matching Tropic Rubber Strap

Completing each watch is an integrated Tropic-style FKM rubber strap colour-matched to its respective dial. The durable rubber strap reinforces the watch’s sporty nature while ensuring comfort on the wrist, fastening with a brushed bronze pin buckle that complements the case.

Availability and Price

The new Yema Superman Bronze CMM.10 successfully combines the warmth and evolving character of a bronze case with the technical advantages of the brand’s modern manufacture movement. The addition of three glossy gilt dials further broadens the appeal of the collection, offering attractive alternatives for enthusiasts seeking a vintage-inspired dive watch with contemporary mechanical credentials.

The new Yema Superman Bronze CMM.10 is priced at € 1,790.

Read more here.

General Specifications:

Brand: Yema

Model: Superman Bronze CMM.10

Reference: 17.26.10.38.ZN.U8 (brown), 17.26.10.34.ZN.U4 (green), 17.26.10.37.ZN.U7 (white)

Dial: Brown lacquered, green lacquered, white lacquered

Lume: Super LumiNova

Case Material: Bronze

Case Dimensions: 39 mm Diameter, 10.95 mm thickness, 48 mm lug-to-lug

Crystal: Sapphire glass

Case Back: Sapphire glass

Water Resistance: 300 Meters

Strap: FKM rubber strap with a bronze pin buckle

Calibre: CMM.10

Functions: Hours, minutes, seconds

Winding: Automatic

Frequency: 4 Hz (28,800 Vph)

Power Reserve: 70 hours

Price: € 1,790

Availability: Now

Limited Edition: No

August 19 2025

Louis Erard Gravée Main: The Art Of Hand Engraving

MRSTATELESS LOUIS ERARD, NEW RELEASES 2025, Lacquer Dial, Limited Edition, Small Seconds 0

Louis Erard continues its mission of bringing traditional craftsmanship to contemporary watchmaking with the introduction of the Gravée Main. This limited edition series highlights the centuries-old art of hand engraving, offering collectors a timepiece where no two watches are alike.

Hand-Engraved Casework

The Gravée Main distinguishes itself through the work of Ukrainian engraver Maksym Shavlak, who dedicates over fifty hours to each watch. Using steel—a material notably more demanding to engrave than gold—Shavlak creates intricate floral baroque motifs inspired by 18th-century clocks and pocket watches. Every component of the case, from the bezel and lugs to the crown and buckle, is engraved by hand, ensuring that each of the 99 pieces produced carries its own identity.

Case and Dimensions

The watch is housed in a 42 mm polished stainless steel case, with a thickness of 12.25 mm and a lug-to-lug measurement of 49.90 mm. A domed sapphire crystal with anti-reflective treatment on both sides protects the dial, while the watch maintains 50 metres of water resistance.

A Refined Dial

In contrast to the elaborate case, the dial design is understated. Finished in black lacquer with anthracite engravings, it features Roman numerals and pear-shaped rhodium-plated hands for a classical touch. A small seconds subdial at six o’clock completes the layout, keeping the focus on legibility while allowing the hand engraving to take centre stage.

Movement

Powering the Gravée Main is the Sellita SW261-1 automatic movement, beating at 28,800 vibrations per hour and offering a 38-hour power reserve. The elaboré-grade calibre is decorated with an openworked oscillating weight, finished with a black lacquered Louis Erard emblem, visible through the sapphire caseback.

Strap and Buckle

The timepiece is fitted with a black grained calfskin strap with matching stitching. Quick-release spring bars allow for easy strap changes, though the hand-engraved steel pin buckle makes the strap an integral part of the overall design.

Availability and Price

The Louis Erard Gravée Main is limited to 99 unique pieces, each individually hand-engraved. The watch is priced at CHF 5,450 plus taxes.

Read more here.

General Specifications:

Brand: Louis Erard

Model: Gravée Main

Reference: 34237GA82.BVAG170

Dial: Black lacquer

Case Material: Stainless steel with full hand engraving

Case Dimensions: 42 mm Diameter, 12.25 mm thickness, 49.90 mm lug-to-lug

Crystal: Sapphire glass

Case Back: Sapphire glass

Water Resistance: 50 Meters

Strap: Black grained calfskin leather strap with hand-engraved steel pin buckle

Calibre: Sellita SW261-1 Élaboré Grade

Functions: Hours, minutes, small seconds

Winding: Automatic

Frequency: 4 Hz (28,800 Vph)

Jewels: 31

Power Reserve: 38 hours

Price: CHF 5,450 (excl. VAT)

Availability: Now

Limited Edition: Yes, 99 pieces

Credor_GoldfeatherTourbillonLEGBCF999_1100x667_1

July 29 2025

First Tourbillon In The Goldfeather Collection: Credor GBCF999 Limited Edition

MRSTATELESS CREDOR, NEW RELEASES 2025, Lacquer Dial, Limited Edition, Platinum, Tourbillon 0

Credor, the high-end division of Seiko founded in 1974, continues to push the boundaries of traditional Japanese watchmaking with the introduction of the Goldfeather Tourbillon Limited Edition GBCF999. This model marks a significant milestone for the brand, as it is the first time a tourbillon has been integrated into the Goldfeather line—an ultra-thin mechanical series that showcases refined elegance through artisanal excellence and technical innovation.

Case and Dimensions

The GBCF999 is presented in a finely polished 950 platinum case, measuring 38.60 mm in diameter and only 8.60 mm in height, adhering to the Goldfeather series’ reputation for thin, dress-oriented timepieces. Its construction reflects subtle sophistication, including a stepped bezel-lug transition and a compact, knurled crown engraved with the Credor emblem. The front is fitted with a domed sapphire crystal, while a flat sapphire exhibition caseback allows full visibility of the decorated movement.

Artistic Dial Composition

The dial is a visual showcase of Japanese decorative arts. At its foundation is a base of deep black Urushi lacquer, onto which traditional techniques are layered. The dial features an intricate motif of birds in flight, created using raden (Mother-of-Pearl inlay) and maki-e (gold powder sprinkling), both executed by expert Japanese artisans. In addition, the kirikane technique—where gold is cut into fine shapes—is used to enhance the visual dynamism of the design.

An aperture on the left side of the dial reveals the tourbillon mechanism, secured by an openworked gold bridge. Around the opening, a radial pattern of gold dots evokes a stylized setting sun, reinforcing the natural theme.

Tourbillon Movement

Powering the GBCF999 is the manual-winding Credor Caliber 6850, an evolution of the Caliber 6830. This updated movement integrates a tourbillon escapement and features an increased 60-hour power reserve, made possible by a larger barrel and mainspring. The movement architecture is intentionally asymmetrical, shifted within the case to accommodate an additional decorative feather motif—executed in raden and maki-e—crafted from the iridescent shell of the Japanese Yakougai (green turban snail).

Visible through the sapphire caseback, the bridges are hand-engraved with a radial feather pattern, inspired by avian primary feathers used for flight. The tourbillon cage is visible from both sides of the case, highlighting its central mechanical role and aesthetic contribution.

Strap and Limited Availability

The watch is paired with a black crocodile leather strap, free from visible stitching, and fitted with a 950/900 platinum triple-fold clasp featuring a push-button release. Only 10 examples of the Goldfeather Tourbillon GBCF999 will be produced. It is priced at € 190,000.

Read more here.

General Specifications:

Brand: Credor

Model: Goldfeather Tourbillon Limited Edition

Reference: GBCF999

Dial: Black Urushi lacquered with flock of birds in raden and kirikane

Lume: No

Case Material: Platinum

Case Dimensions: 38.60 mm diameter, 8.60 mm thickness

Crystal: Sapphire Glass

Case Back: Sapphire Glass

Water Resistance: 30 Meters

Strap: Black corcodile leather strap with a platinum three-fold clasp

Calibre: 6850

Functions: Hours, minutes, tourbillon

Winding: Automatic

Frequency: 3 Hz (21,600 Vph)

Jewels: 22

Power Reserve: 60 Hours

Price: € 190,000

Limited Edition: Yes, 10 pieces

Availability: Now

June 16 2025

Jaeger-LeCoultre Expands The Polaris Line With New Ocean Grey Chronograph

MRSTATELESS JAEGER-LECOULTRE, NEW RELEASES 2025, Chronograph, Lacquer Dial 0

In 2025, Jaeger-LeCoultre continues to evolve its Polaris collection with a new chronograph model that features the captivating Ocean Grey lacquer dial—previously introduced on the Polaris Date and Polaris Geographic. The new Polaris Chronograph Ocean Grey combines advanced chronograph mechanics with a refined aesthetic, further enriching the brand’s sport-luxury portfolio.

Case Design

The watch features a stainless steel case that measures 42mm in diameter and 13.39mm in thickness. It offers water resistance to 100 metres, making it suitable not only for everyday wear but also for recreational swimming. True to Jaeger-LeCoultre’s reputation for high craftsmanship, the case showcases a refined mix of finishing techniques. Predominantly brushed surfaces are paired with polished chamfers, adding a level of sophistication rarely seen in sport chronographs. Even the chronograph pushers have been given detailed finishing treatment, reinforcing the brand’s dedication to both functionality and aesthetics.

A Multi-Dimensional Dial in Ocean Grey

At the center of this new release is its intricately constructed dial, finished in a distinctive Ocean Grey tone. This dial is the result of a labor-intensive process involving the application of 35 layers of hand-lacquered coating, which together produce a rich gradient that transitions from a smoky center to darker edges. The surface of the dial is further enhanced with three separate textures: the central medallion displays a sunray-brushed finish that creates a radiant effect; the ring encircling it, where the applied hour markers are positioned, introduces a contrasting grained texture; and finally, the outer section containing the tachymeter scale is executed with a glossy black finish, providing strong legibility and visual contrast. Adding to the dial’s depth and character are subtle orange accents, which appear on the tip of the central chronograph seconds hand and various scale indicators—details that lend a dynamic touch to the otherwise restrained color scheme of grey, black, and blue.

Technical Features

Driving the watch is Jaeger-LeCoultre’s in-house automatic Calibre 761, a column-wheel chronograph movement that delivers precision and durability. The movement offers a power reserve of 65 hours, providing a reliable experience across multiple days of wear. It is also visible through the exhibition caseback, offering a glimpse into the mechanical craftsmanship within.

Versatile Strap System

To enhance versatility, the Polaris Chronograph Ocean Grey is delivered with two interchangeable strap options: a textured blue-grey canvas strap and a robust black rubber strap. Both are equipped with a quick-change mechanism that allows users to easily switch between straps without the need for tools. A shared folding clasp is included, designed to be used seamlessly across both straps.

Availability and Pricing

The Jaeger-LeCoultre Polaris Chronograph Ocean Grey is currently available at Jaeger-LeCoultre boutiques and authorized retailers. It is priced at € 16,100.

Read more here.

General Specifications:

Brand: Jaeger-LeCoultre

Model: Polaris Chronograph

Reference: Q9028651

Dial: Ocean grey lacquer

Case Material: Stainless steel

Case Dimensions: 42 mm Diameter, 13.39 mm thickness, 49 mm lug-to-lug

Crystal: Sapphire Glass

Case Back: Sapphire Glass

Water Resistance: 100 Meters

Strap: Black rubber strap with quick-release system and easy-interchangeable steel folding buckle plus a blue-grey canvas strap

Calibre: 761

Functions: hours, minutes, small seconds, chronograph

Winding: Automatic

Frequency: 4 Hz (28,800 Vph)

Power Reserve: 42 Hours

Price: € 16,100

Limited Edition: No

1 2

Tag: Lacquer Dial

A 1980s Design Reinterpreted

Two Ceramic Cases, Two Dial Personalities

Automatic Mechanics

A Distinctive Caseback

From Limited Edition to Permanent Collection

A More Compact Chronograph Case

Senator Chronograph: A Traditional Interpretation

Senator Chronograph Navigator: Built Around Legibility

Calibre 37-24: The Technical Core

Saxon Finishing on Display

Three Strap and Bracelet Options

Availability and Prices

The Importance of 38.5mm

Titanium Changes the Character

Everything on the Dial Has a Purpose

A Proven Mechanical Foundation

Two Personalities

A Flieger Without the Excess

A Rectangular Case with Architectural Character

Minimalism on the Dial

A Compact High-Beat Automatic

Leather Straps Complete the Design

Limited First Production

Our Take

Laurel-Inspired Design

HCC005: Traditional Enamel Dial

HCC006: Japanese Urushi Lacquer

Seiko Calibre 6R5H

Leather Straps

Two Interpretations of Japanese Craftsmanship

Bronze Case With Compact Vintage Proportions

Three New Lacquered Dials

In-House CMM.10 Manufacture Movement

Matching Tropic Rubber Strap

Availability and Price

Hand-Engraved Casework

Case and Dimensions

A Refined Dial

Movement

Strap and Buckle

Availability and Price

Case and Dimensions

Artistic Dial Composition

Tourbillon Movement

Strap and Limited Availability

Case Design

A Multi-Dimensional Dial in Ocean Grey

Technical Features

Versatile Strap System

Availability and Pricing

ABOUT

SUPPORT

FOLLOW US